午夜影视免费,sihu永久在线播放地址,国产精品三级av及在线观看,护士张开腿被奷日出白浆,国产91色在线

液壓油

產品名稱	ISO粘度等級	粘度指數	開口閃點 ℃	傾點 ℃	主要應用
RENOLIN B 10 RENOLIN B 15 RENOLIN B 20	32 46 68	100 100 100	190 210 220	-27 -27 -24	通用型抗磨液壓油，用于對油品氧化、老化、抗磨及抗乳化性能有要求的場合，滿足并超過DIN HLP及ISO HM 等級。
RENOLIN B 32 HVI RENOLIN B 46 HVI	32 46	170 170	175 180	-36 -33	低凝抗磨液壓油，用于所有液壓系統，特別是要求高粘度指數的場合。如寒冷地區或低溫環境機器設備的液壓系統，露天作業的機器設備及工作溫度極大的液壓裝置。滿足并超過DIN HVLP及ISO HV 等級。
RENOLIN MR 0 RENOLIN MR 1 RENOLIN MR 3 RENOLIN MR 5 RENOLIN MR 10 RENOLIN MR 15 RENOLIN MR 20 RENOLIN MR 30	2 5 10 22 32 46 68 100	-- -- 105 100 100 100 100 95	75 85 160 165 200 220 225 230	-42 -33 -30 -30 -30 -30 -27 -21	多用途潤滑油，具有良好的抗氧化性及粘溫性能，同時還有突出的防銹、清潔、抗磨性能。Renolin MR 0,MR 1,MR 3 是機床及紡織機器主軸/錠子用油。Renolin MR 5/10/20 屬于極壓性液壓油，可在100℃的高溫下持續使用，并提供優異的防銹保護。Renolin MR 30 用于較大的齒輪箱中，亦可作為初裝及防銹油。 Renolin MR 系列產品滿足并超過DIN HLPD/CLP及ISO HMD/CKC等級。
HYDROTHERM 46 NP 3	46	170	--	45	乙二醇基的抗燃液壓油，用于接近高溫、火焰及有防火要求的液壓循環系統，主要用于冶煉、礦山、注塑成型等行業的液壓設備。滿足并超過DIN/ISO HFC 等級。

RENOLIN B

High Quality HM Hydraulic Oils and CKC Lubricating Oils

Diagram

High Quality HM Hydraulic Oils and CKC Lubricating Oils

The function and operational reliability of hydraulic systems depends largely on the quality of the hydraulic fluids used which, apart from transfering forces, must also seal, cool and lubricate. Because hydraulic oils are subject to a variety of stresses, they must fulfil a number of requirements. These must be maintained throughout the service life of the oil and must help combat the formation of undesirable reaction by-products. The RENOLIN B series of oils are based on highly ageing resistant solvent raff inates and fulfill, and in many points surpass, the minimum requirements made on HM hydraulic oils according to ISO 6743-4.

The RENOLIN B series of oils offer the following advantages:

Good EP properties and thus protection against wear
Good viscosity-temperature behaviour
Excellent oxidation stability and resistance to ageing
Excellent corrosion protection
Rapid air release and low foaming
Good demulsification characteristics
Good elastomer compatibility

Application:

The RENOLIN B series of oils are not just high grade hydraulic oils. They are also excellent CKC lubricating oils according to ISO 6743-6 which can be used for numerous applications such as gearboxes and bearings.

RENOLIN		B 3	B 5	B 10	B 15	B 20	B 30
acc. to ISO 6743-4		HM 10	HM 22	HM 32	HM 46	HM 68	HM 100
acc. to DIN 51 502		HLP 10	HLP 22	HLP 32	HLP 46	HLP 68	HLP 100
Characteristics	Unit							Test method
Colour		1	1	1	1.5	2	2.5	ASTM D 1500
Kinematic viscosity
at 40 °C	mm2/s	10	22.4	32	47	67	100	ASTM D 445
at 100 °C	mm2/s	2.5	4.4	5.6	7.1	8.6	11	ASTM D 445
Viscosity index		61	105	114	109	99	94	ASTM D 2270
Density at 15 °C	kg/l	0.85	0.865	0.88	0.88	0.882	0.888	ASTM D 1298
Flash point, Cleveland open cup	°C	160	163	188	210	224	232	ASTM D 92
Pour point	°C	- 27	- 30	- 27	- 27	-24	- 21	ASTM D 97
Neutralization number	mg KOH/g	0.3	0.3	0.3	0.3	0.3	0.3	ASTM D 974
Saponification number	mg KOH/g	0.6	0.6	0.6	0.6	0.6	0.6	ASTM D 94
Oxide ash	% mass	0.2	0.2	0.2	0.2	0.2	0.2	ASTM D 482
Water content	% mass	not traceable	not traceable	not traceable	not traceable	not traceable	not traceable	ASTM D 95
Insolubles	% mass	not traceable	not traceable	not traceable	not traceable	not traceable	not traceable	DIN 51 592
Demulsification	min	15	15	15	15	15	15	DIN 51 599
Air release at 50 °C	min	1	3	6	7	8	16	ASTM D 3427
Foaming,
seq. I	ml	35/0	5/0	20/0	10/0	20/0	10/0	ASTM D 892 seq. I-III
seq. II	ml	10/0	10/0	20/0	40/0	30/0	30/0	ASTM D 892 seq. I-III
seq. III	ml	35/0	5/0	20/0	10/0	20/0	10/0	ASTM D 892 seq. I-III
Copper corrosion	degree of corr.	1a-100A24	1a-100A24	1a-100A24	1a-100A24	1a-100A24	1a-100A24	ASTM D 130
Rust prevention		pass A	pass A	pass A	pass A	pass A	pass A	ASTM D 665
FZG mechanical gear rig test	load stage	12	12	12	12	12	12	DIN 51 354-2
Vickers vane pump test, loss of mass
on ring	mg	< 120	< 120	< 120				IP 281
on vanes after 250 h	mg	< 30	< 30	< 30				IP 281
Effect on SRE-NBR 1 seal material acc. to DIN 53 538-1 at 100 °C +/– 1 °C after 7 days +/– 2 hours, relative volume change
change in Shore A	%	15	7	5	5	5	5	DIN 53 521 together with DIN 53 505
hardness	Shore	- 2	- 1	- 1	- 1	- 1	- 1	DIN 53 521 together with DIN 53 505

Disclaimer of Liability

上一產品：嘉實多 Hyspin AWS 液壓油系列

下一產品：福斯液壓油RENOLIN AW46/AW68/福斯水乙二醇阻燃液壓液